Multitech MultiConnect Adapter Podręcznik Użytkownika Strona 31
- Strona / 154
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Chapter 2 – Command Line Interface (CLI)
Command Line Interface and Application Examples for Multi-Tech Systems, Inc. IP Modules (S000368F) 31
Serial Commands – Setup
Command Syntax Set serial [s0/s1] flow-control <none/rts-cts>
Description
Set the flow-control of the serial port. By default flow-control is disabled on the serial
port.
Default Value
rts-cts
Success
OK
Error 1. Too few arguments
“Usage: set serial s0/s1 flow-control <none/rts-cts>
Type ‘set serial s0/s1 flow-control ?’ for more information”
2. Invalid flow-control setting
“error: flow-control supported: [none/rts-cts]
Type ‘set serial s0/s1 flow-control ?’ for more information”
Command Syntax set serial [s0] host-interaction-mode <enable/disable>
Description
This parameter is set by the host to enable the host-interactive-mode. When this
mode is set, the host/serial device can use SMTP client, POP3 client, and HTTP
server.
Host interaction mode is valid only for device port s0.
Note: Telnet Auto-Dialout and PPP cannot be enabled when this mode is enabled.
Default Value
Disable
Success
OK
Error 1. Too few arguments
"Usage: set serial s0 host-interaction-mode <enable/disable>
Type set serial s0 host-interaction-mode ?”
2. Invalid string
Type set serial s0 host-interaction-mode ?”
3. Port used by Auto-dialout
“ERROR: Port used by Auto-dialout”
4. “set serial s1 host-interaction-mode s1” is given
“error: Command not supported on modem port s1”
Command Syntax set serial [s0/s1] modem connect-string <connect-str>
Description
Sets the Modem Connect string. Triggers for a reboot upon save.
Note: The configured modem strings takes precedence over the MODEM.CNF
Default Value
CONNECT
Success
OK
Error 1. Too few arguments
"Usage: set serial s0/s1 modem connect-string <connect-str>
Type 'set serial s0/s1 modem connect-string ?' for more information"
Command Syntax set serial [s0/s1] modem dial-number <phone-num>
Description
Sets the dial-number to be dialed.
Default Value
NA
Success
OK
Error 1. Too few arguments
"Usage: set serial s0/s1 modem dial-number <phone-num>
Type 'set serial s0/s1 modem dial-number ?' for more information"
Command Syntax set serial [s0/s1] modem dial-prefix <dialprefix>
Description
Sets the Modem Dial-Prefix. Triggers for a reboot upon save.
Note: The configured modem strings takes precedence over the MODEM.CNF
Default Value
ATDT
Success
OK
Error 1. Too few arguments
"Usage: set serial s0/s1 modem dial-prefix <dialprefix>
Type 'set serial s0/s1 modem dial-prefix ?' for more information"
- Multi-Tech IP Connectivity 1
- Revision History 3
- Table of Contents 4
- Chapter 1 – Managing and 7
- Configuring IP Modules 7
- Chapter 2 – IP Command Line 8
- Interface (CLI) 8
- General Setup Commands 9
- • Hardware information 14
- • System Uptime 14
- • Memory Utilization 14
- • Flash Memory Map 14
- IP Setup Commands 15
- Serial Setup Commands 20
- PPP Setup Commands 37
- HTTP Server Commands 44
- SMTP Client – Commands 46
- POP3 Client Commands 49
- FTP Client Commands 52
- SNTP Client – Commands 54
- 2. Too few arguments 55
- Commands 61
- Region Codes Using the CLI 64
- Chapter 4 – Scenario Setup 65
- IP Modes of Operation 66
- Connectivity Using Dialout 68
- Scenario 1 – Manual Dialout 71
- Scenario 2 – Auto Dialout 72
- Dialout Serial s1 74
- Functionality 75
- Telnet Dial-in Features 76
- UDP Dial-in Features 76
- Commands for Auto-Dialin 77
- Serial Tunneling 81
- Auto-Dial-in Using UDP 84
- NMEA Filtering 85
- Network Processor 90
- PPP Configuration 92
- Wakeup-on Call Feature 94
- Show Commands 94
- Connect Type 95
- Chapter 9 – HTTP Server 96
- Setup and Configuration 97
- Configuration Modes 98
- Host Configuration Mode 98
- 2. The Embedded HTML Page 100
- 3. CGI Scripts 100
- Technical Information 102
- Chapter 10 – SMTP Client 103
- Command Prompt 104
- Interactive Mode 105
- Chapter 11 – POP3 Client 112
- Error Messages 117
- Email with Attachment 118
- Chapter 12 – FTP Client 119
- Prerequisites 120
- About Read and Store 139
- Chapter 13 – SNTP Client 140
- Introduction 142
- Module Acting as Client 146
- Module Acting as Server 147
- .....55 153
- ..................55 154
- ..........................54 154
Powiązane produkty i podręczniki dla Networking Multitech MultiConnect Adapter
(24 strony)
Networking Multitech GFU19 Instrukcja Użytkownika
(226 strony)
(226 strony)
(36 strony)
Networking Multitech FF110 Podręcznik Użytkownika
(167 strony)
(167 strony)
Networking Multitech MMH900 Podręcznik Użytkownika
(200 strony)
(200 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.113 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji