Multitech MultiConnect Adapter Podręcznik Użytkownika Strona 10

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 154
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 9
Chapter 2 – Command Line Interface (CLI)
Command Line Interface and Application Examples for Multi-Tech Systems, Inc. IP Modules (S000368F) 10
General Commands – Setup
Command Syntax restore session
Description
On Telnet dialout, the control is transferred to the command parser passing the
escape sequence “+++ inet”. Invoking “restore session” would resume the Telnet
dialout exiting the command parser.
Default Value
NA
Success
OK
Error 1. Too few arguments
Possible arguments are:
default-config
session
2. ERROR: Session not opened
Command Syntax reset modem
Description
At will, reset the built-in modem.
Default Value
NA
Success
OK
Error 1. Too few arguments
Possible arguments are:
modem
Command Syntax save
Description
Command to Save the configuration to the flash and reboot.
Default Value
NA
Success
OK
Command Syntax telnet <dial-ip-addr> [<port>]
Description
Manual serial dial-in (device port to modem port connectivity).
Invoked from the command shell.
Default Value
NA
Success
OK
Error 1. Too few arguments
2. Invalid IP address/Port
“(Error: hostp = “configured host“. Error: hostp=“configured IP address“
3. When invoked from Command shell connected through Telnet
This command is not supported through Telnet
Command Syntax usage
Description
Provides the command semantics for all the commands.
Default Value
NA
Success
OK
Command Syntax user add <user-name> [<passwd>]
Description
Add the user name and the password to the group.
Notes:
Default Groups: admin, users
Default Users: admin, ipmodule
Only Admin can configure the IP module
Default Value
NA
Success
OK
Error 1. Too few arguments
“Too few arguments. Possible value(s) are username followed by password“
2. Unable to add the user name
“user ‘username‘ exists“
Przeglądanie stron 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 153 154

Komentarze do niniejszej Instrukcji

Brak uwag