Multitech RF760 Instrukcja Użytkownika Pobierz pdf (Strona 36)

Example 4 – SSH Sentinel Accessing LAN Through the RouteFinder

Multi-Tech Systems, Inc. RF760VPN/RF660VPN/RF600VPN Setup Examples Reference Guide (S000283D) 36

Example 4 – Site A Configuration

Configure the RouteFinder at Site A same as was explained in the RF660VPN-to-RF660VPN example 1, with the

exception of the following changes:

1. Click on Networks & Services > Network.

a) Define the IP address that is configured on the remote SSH Sentinel

Client.

For example: Name = Sentinel Client

IP address = 204.26.122.50

Subnet mask = 255.255.255.255

After the SSH Sentinel Client information is entered, it displays in the Network/Host list on this screen.

Sentinel Client 204.26.122.50 255.255.255.255

2. Click on Packet Filters > Packet Filter Rules. The rule for LAN is already present.

Add the rule Sentinel_Client – Any – Any – ACCEPT. This allows the Remote Sentinel Client access to the

RouteFinder and LAN at Site A.

Note: The rules for LAN and Sentinel_Client require a static IP Address for the Sentinel client. If you want to

use a dynamic IP Address for the Sentinel client, then include and enable the rule Any – Any – Any –

ACCEPT.

After the rule is entered, it displays in the User Defined Packet Filter Rules at the bottom of the screen.

1 Sentinel_Client Any Any ACCEPT

1 2 ... 31 32 33 34 35 36 37 38 39

Brak uwag

Multitech RF760 Instrukcja Użytkownika Strona 36