Multitech RF760 Instrukcja Użytkownika Pobierz pdf (Strona 15)

Example 1 – Testing Your Configuration

Multi-Tech Systems, Inc. RF760VPN/RF660VPN/RF600VPN Setup Examples Reference Guide (S000283D) 15

Testing Site B Workstation Connected to LAN Port of the RouteFinder:

a) At the DOS prompt ping a workstation connected to the LAN port of the RouteFinder at Site A.

Example: Ping 192.168.2.100 <return>

You should see four successful packet transmit/receive statements. If you do not, try several more times. You

may see several initial failures while the two RouteFinders make a secure connection.

b) If this fails, try to ping the WAN port of the RouteFinder at Site A.

Example: Ping 204.26.122.103

You should see four successful packet transmit/receive statements. If you do not, try several more times. You

may see several initial failures while the two RouteFinders make a secure connection.

c) If this fails, try to ping the WAN port of the RouteFinder at Site B.

Example: Ping 204.26.122.3

Note: If any of these tests fail then verify that the workstation is connected to the LAN port of the RouteFinder. The

LAN port LINK LED should be on and the ACT LED should blink on each time you ping the RouteFinder. Also verify

that the RouteFinder is configured properly.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

Brak uwag

Multitech RF760 Instrukcja Użytkownika Strona 15