Multitech RF760 Instrukcja Użytkownika Pobierz pdf (Strona 13)

Example 1 – LAN-to-LAN Fixed IP Addresses Using RF760/660/600VPN

Multi-Tech Systems, Inc. RF760VPN/RF660VPN/RF600VPN Setup Examples Reference Guide (S000283D) 13

Step 10 – Click on Packet Filters > Packet Filter Rules. The rule for LAN is already present.

a) Add the rule RemoteWAN_IP – Any – Any – ACCEPT. This allows the Remote WAN at Site B to

access the RouteFinder and LAN at Site A. After the rule is entered, it displays under User Defined

Packet Filter Rules.

b) Add the rule RemoteLAN – Any – Any – ACCEPT. This allows the Remote LAN at Site B access to the

RouteFinder and LAN at Site A. After the rule is entered, it displays under User Defined Packet Filter

Rules.

Step 11 – Click on VPN > IPSec to open this IPSec screen.

a) Enable VPN Status by placing a check mark in the box and clicking on Save.

b) Do not check IKE-Debugging.

c) Do not check IPSec Debugging.

d) Click on Add an IKE connection to enter a new IPSec connection.

The Add an IKE Connection screen displays. These are the same settings as for Site A.

a. Connection name

Enter a text name that will identify the connection for you. For this example, enter SiteB.

b. Compression

Do not check for this example.

c. Perfect Forward Secrecy (PFS)

Check the PFS checkbox. This is enabled by default.

d. Authentication Method

Check the Secret authentication method for this example.

e. Secret

Enter the key that matches the secret key at Site B.

f. Select Encryption

Select the encryption method. Select 3DES.

g. IKE Life Time

Select the default value 3600 seconds.

h. Key Life

Select the default value 28800 seconds.

i. Number of Retries (Zero for Unlimited)

Enter of the number of retries you want the device to make in order to establish the connection. Use

zero for unlimited retries.

j. Local WAN IP

This is the interface initiating the IPSec tunnel. For this example, set to WAN.

k. Local LAN

For this example, set to LAN.

l. Remote Gateway IP or FQDN

For this example with a static IP address, set to RemoteWAN_IP.

m. Remote LAN

For this example, set to RemoteLAN.

n. UID (Unique Identifier String)

For this example, it is recommended that you accept the default to disable UID.

o. Local ID

Do not set for this example.

p. Remote ID

Do not set for this example.

q. NetBIOS Broadcast

Do not set for this example.

This completes the configuration of the RF660VPN at Site B for Example 1.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 38 39

Komentarze do niniejszej Instrukcji

Brak uwag

Multitech RF760 Instrukcja Użytkownika Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Multitech RF760