Multitech RF560VPN Instrukcja Użytkownika Pobierz pdf (Strona 39)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 39

14. The VPN Settings screen for entering specific VPN settings will display. The Connection Name

(Site-A) defaults into the first field. Select Enable UID (Unique Identifier String) and continue to

enter the following settings:

a) Select Enable UID.

b) Local IPSec Identifier – Enter an IP address that identifies the Local IPSec for this connection.

(Ex: 192.168.0.2)

c) Remote IPSec Identifier – Enter an IP address that identifies the Remote IPSec for this

connection. (Ex: 204.26.122.103)

d) Remote IP Network – Enter the Remote IP Network address (LAN) for Site B. (Ex:

192.168.2.0)

e) Remote IP Netmask – Enter the Remote IP Netmask address for Site B. (Ex: 255.255.255.0)

f) Remote Gateway IP – Enter the Remote Gateway IP address (WAN) for Site B. (Ex:

204.26.122.103). If Site B is using dynamic IP addressing, set this value to 0.0.0.0.

1 2 ... 34 35 36 37 38 39 40 41 42

Brak uwag

Multitech RF560VPN Instrukcja Użytkownika Strona 39