Multitech RF560VPN Instrukcja Użytkownika Strona 30

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 42
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 29
Multi-Tech Systems, Inc.
RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 30
Example 2: LAN-to-LAN Configuration Chart
LAN-to-LAN Application – Site A:
RF550VPN/RF560VPN
LAN-to-LAN Application – Site B:
RF550VPN/RF560VPN
1. Domain name = Site-A.com
2. Public Class C = 204.26.122.x
1. Domain name = Site-B.com
2. Public Class C = 204.26.122.x
3. SETUP WIZARD > DEVICE IP SETTINGS
IP Address: 192.168.2.1
IP Subnet Mask: 255.255.255.0
3. SETUP WIZARD > DEVICE IP SETTINGS
IP Address: 10.10.10.1
IP Subnet Mask: 255.255.255.0
4. SETUP WIZARD > ISP SETTINGS
Select “Static IP Settings’
IP assigned by your ISP: 204.26.122.103
IP Subnet Mask: 255.255.255.0
ISP Gateway Address: 204.26.122.3
4. SETUP WIZARD > |ISP SETTINGS
Select “Static IP Settings’
IP assigned by your ISP: 192.168.0.2
IP Subnet Mask: 255.255.255.0
ISP Gateway Address: 192.168.0.1
5. SETUP WIZARD > VPN SETTINGS
Connection Name = Site-B
Enable ‘Enable UID (Unique Identifier String)
Local IPSEC Identifier = 204.26.122.103
Remote IPSEC Identifier = 192.168.0.2
Disable (do not check) ‘Enabled Keep Alive’
Disable (do not check) ‘Enabled NetBIOS
Broadcast’
Remote Site = LAN
Remote IP Network = 10.10.10.0
Remote IP Netmask = 255.255.255.0
Remote Gateway IP = 204.26.122.3
Network Interface = WAN ETHERNET
Secure Association = check ‘IKE’
Perfect Forward Secure = check ‘enabled’
Encryption Protocol = select ‘3DES’
Preshared Key (must match secret code at Site B)
Key Life = set to default
IKE Life Time = set to default
5. SETUP WIZARD > VPN SETTINGS
Connection Name = Site-A
Enable ‘Enable UID (Unique Identifier String)
Local IPSEC Identifier = 192.168.0.2
Remote IPSEC Identifier = 204.26.122.103
Disable (do not check) ‘Enabled Keep Alive’
Disable (do not check) ‘Enabled NetBIOS
Broadcast’
Remote Site = LAN
Remote IP Network = 192.168.2.0
Remote IP Netmask = 255.255.255.0
Remote Gateway IP = 204.26.122.103
Network Interface = WAN ETHERNET
Secure Association = check ‘IKE’
Perfect Forward Secure = check ‘enabled’
Encryption Protocol = select ‘3DES
Preshared Key (must match secret code at Site A)
Key Life = set to default
IKE Life Time = set to default
Przeglądanie stron 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 41 42

Komentarze do niniejszej Instrukcji

Brak uwag