Multitech MVP 800 Podręcznik Użytkownika Strona 12
- Strona / 88
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
12
MultiVOIP User Guide
Back Panel Description
The cable connections for the MultiVOIP are made at the back panel. Connectors include Power,
Command Port (RS232), Ethernet (10BASE-T), Voice/Fax Channels (E&M, FXO and FXS). The
cable connectors are shown in Figure 1-4 and defined in the following groups.
E&M FXO FXS E&M FXO FXS E&M FXO FXS
VOICE/
FAX
CHANNEL
8
VOICE/
FAX
CHANNEL
4
VOICE/
FAX
CHANNEL
7
VOICE/
FAX
CHANNEL
3
VOICE/
FAX
CHANNEL
6
VOICE/
FAX
CHANNEL
2
VOICE/
FAX
CHANNEL
5
VOICE/
FAX
CHANNEL
1
CHANNEL 10
CHANNEL 9
CHANNEL 8
CHANNEL 7
CHANNEL 6
CHANNEL 5
CHANNEL 4
CHANNEL 3
CHANNEL 2 (RS232/V.35)
CHANNEL 1 (RS232/V.35)
10BASET
ETHERNET
COMMAND PORT
EXT. COMPOSITE LINK (RS232/V.35)
POWER
I
O
GND
T1 DSU
MONITOR
XMT RCV
INTERNAL
COMPOSITE
LINK
E&M FXO FXS
Figure 1-4. Back Panel
Power Connector
The Power connector is used to connect the external power supply to the MultiVOIP. The Power
connector is a 7-pin circular DIN connector. A separate power cord is connected to the power supply
and the live AC grounded outlet.
Command Port Connector
The Command Port connector is used to configure the MultiVOIP using a PC with a serial port and
running Windows® software. The Command Port connector is a DB-25 female connector.
10Base-T (Ethernet) Connector
The Ethernet 10Base-T connector is used to connect the MultiVOIP to a LAN using unshielded
twisted cable. This connector is a keyed RJ-45 jack.
VOICE/FAX CHANNEL _
The Voice/Fax channel connectors include three options per channel: E&M, FXO and FXS.
E&M - This connector is used if you are connecting VOICE/FAX CHANNEL _ to the E&M trunk on a
PBX. This connector is an RJ-45 jack.
FXO - This connector is used if you are connecting VOICE/FAX CHANNEL _ to the station side of a
PBX. This connector is an RJ-11 jack.
FXS - This connector is used if you are connecting VOICE/FAX CHANNEL _ to a station device, etc.,
an analog telephone, KTS telephone system, or fax machine. This connector is an RJ-11 jack.
- Standalone Voice/IP Gateway 1
- Models MVP400 and MVP 800 1
- User Guide 1
- Contents 3
- Appendixes 4
- Glossary 4
- Preview of this Guide 6
- MultiVOIP Application 8
- VOIP Dialing Directory 10
- Front Panel Description 11
- Back Panel Description 12
- Specifications 13
- MultiVOIP User Guide 14
- Chapter 2 - Installation 15
- Installing Your MultiVOIP 16
- Safety Warning Telecom 16
- Unpacking Your MultiVOIP 17
- Safety Warnings 17
- Phase 1: Cabling Procedure 18
- 2 (Default) 19
- Introduction 40
- MultiVOIP Configuration 41
- Changing Channel Parameters 42
- Voice/Fax 43
- Regional 44
- Changing IP Parameters 47
- Viewing Statistics 49
- SNMP Statistics 50
- Others Setup 51
- Viewing Call Progress 52
- Remote Configuration 54
- LAN-Based 56
- Remote Management 58
- MultiVOIP Telnet Server Menu 59
- Voice over IP Configuration 59
- Phone Directory Database 59
- Phone Directory Configuration 59
- WEB Management 60
- Limited Warranty 62
- Tech Support 63
- The Multi-Tech BBS 64
- About the Internet 65
- Internet Protocol (IP) 70
- Appendix B - Cabling Diagrams 71
- Class A Statement 72
- Fax Branding Statement 72
- FCC Part 68 Telecom 72
- Canadian Limitations Notice 73
Powiązane produkty i podręczniki dla Networking Multitech MVP 800
Networking Multitech ISIHP-4U Dokumentacja
(44 strony)
(44 strony)
Networking Multitech GFU19 Instrukcja Użytkownika
(158 strony)
(158 strony)
Networking Multitech MT5634ZPX-PCl Dokumentacja
(36 strony)
(36 strony)
Networking Multitech MTSMC-G-F1 Dokumentacja
(52 strony)
(52 strony)
Networking Multitech GFU19 Dokumentacja
(18 strony)
(18 strony)
(90 strony)
(1 strony)Champion Power Equipment 10020 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Wciągnik Champion Power Equipment 10020.
Dostarczamy 2 pdf podręczników Champion Power Equipment 10020 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Komentarze do niniejszej Instrukcji