Multitech MultiModem Cell MTCBA-C1 Podręcznik Użytkownika Strona 29
- Strona / 135
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Chapter 8 – Communication Commands
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 29
V.42bis Data Compression +DS
Description: This command enables or disables V.42bis data compression if this feature is provided on the
PSTN in the IWF.
Syntax: Command syntax: AT+DS=<dir>,<neg>,<P1>,<P2>
Command Possible Responses
AT+DS=3,0,4096,250
Note: Set new parameters
OK
Note: Command valid
AT+DS?
Note: Current values
+DS: 3,0,4096,250
OK
Note: Command valid
Values: Four numeric sub-parameters are accepted:
<dir> Specifies the desired direction(s) of operation of the data compression function; from the
DTE point of view.
Default is 3.
0 Negotiated … no compression
1 Transmit only
2 Receive only
3 Both directions, accept any direction
<neg> Specifies whether or not the DCE should continue to operate if the desired result is not
obtained.
Default is 0
0 Do not disconnect if V.42 bis is not negotiated by the remote DCE as specified in
<dir>
1 Disconnect if V.42 bis is not negotiated by the remote DCE as specified in <dir>
<P1>
512-4096 Specifies the maximum number of dictionary entries that should be
negotiated.
Default is 4096.
<P2>
6-250 Specifies the maximum string length to be negotiated.
Default is 250.
- CDMA-C1 AT Commands 1
- Contents 3
- Chapter 1 – Introduction 7
- Chapter 2 – AT Commands 8
- Overview 8
- Command Types 9
- Command Format and Syntax 9
- Input Command Syntax 10
- Other Syntax 10
- Output Response Syntax 10
- Parameter Defaults 10
- Unsolicited Message Syntax 11
- Attention AT 12
- Repeat Last Command A/ 12
- Echo E 12
- Bits +WUSLMSK 13
- Chapter 4 – Identification 15
- Commands 15
- Chapter 5 – Query Commands 17
- Chapter 6 – Global 18
- Configuration Commands 18
- Save Configuration &W 19
- Chapter 7 – Status Commands 20
- Chapter 8 – Communication 26
- Set Diagnostic Port +WDMX 27
- Set DCD Signal &C 27
- Set DTR Signal &D 28
- Set DSR Signal &S 28
- Automatic Answer S0 30
- Command Edit Character S5 31
- Chapter 9 – Call Control 33
- Hang-Up Command H 34
- Answer a Call A 34
- Incoming Call +RING 35
- Emergency Mode +WSOS 37
- Call Answered +WANS 38
- Call Connected +WCNT 38
- Call Ended +WEND 39
- Call Originated +WORG 40
- CPHS Command +CPHS 40
- Call Forwarding +CCFC 42
- Send DTMF Tones +VTS 44
- Chapter 10 – Network Service 45
- Signal Quality +CSQ 46
- Band Preference +WBND 49
- Service Indication +WSRV 50
- Roam Preference +WRMP 50
- Default Cell Band +WDCB 51
- Roaming Indication +WROM 51
- Chapter 11 – Provisioning 54
- Control Commands 54
- Excess SPC Failures +WLCK 55
- Download PRL +DPRL 56
- Commit Changes +WCMT 58
- Set IMSI +WIMI 58
- Slot Cycle Index +WSCI 60
- SID and NID +WSID 60
- Chapter 12 – OTASP / OTAPA 61
- Commit Successful +WOTC 62
- SPL Unlocked +WOTS 62
- NAM Download OK +WOTN 62
- MDM Download OK +WOTM 62
- IMSI Download OK +WOTI 63
- PRL Download OK +WOTP 63
- Chapter 14 – Short Message 70
- Service Control Commands 70
- Read Message +CMGR 71
- List Message +CMGL 72
- Delete Message +CMGD 73
- Chapter 15 – Audio Commands 79
- Microphone Gain +VGT 81
- Speaker Gain Control +VGR 82
- Digital Gain Receive +WDGR 84
- Echo Cancellation +ECHO 86
- Speaker Driver Gain +WSDG 87
- Audio Loopback &T 88
- Chapter 16 – Data Commands 89
- R-SCH Selection $QCMIP 90
- MIP Selection $QCMIPP 91
- Chapter 17 – TCP APP AT 98
- Chapter 18 – Sleep Commands 107
- Builds) 111
- Chapter 19 – Antenna 111
- Commands (Not for IP and GPS 111
- +WANTPOLL 113
- Auxiliary GPS Power +WANT 115
- Scenarios 118
- Call Processing 119
- Sending Binary Data 120
- TCP Socket Examples 121
- TCP Server Example 122
- ATZ, and AT&F 123
- Chapter 22 – CDMA 128
- Terminology and Acronyms 128
Powiązane produkty i podręczniki dla Networking Multitech MultiModem Cell MTCBA-C1
Networking Multitech CDMA Podręcznik Użytkownika
(32 strony)
(32 strony)
Networking Multitech ISIHP-4U Dokumentacja
(44 strony)
(44 strony)
Networking Multitech GFU19 Instrukcja Użytkownika
(158 strony)
(158 strony)
Networking Multitech MT5634ZPX-PCl Dokumentacja
(36 strony)
(36 strony)
Networking Multitech MTSMC-G-F1 Dokumentacja
(52 strony)
(52 strony)
Networking Multitech GFU19 Dokumentacja
(18 strony)
(18 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.149 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji