Multitech MTPSR1-202ST Podręcznik Użytkownika Pobierz pdf (Strona 20)

ProxyServer User Guide

MTPSR1-202ST

IP Port Configuration

This dialog enables the configuration of IP parameters that are generally applicable to IP Proxying on

all ports.

10. The default LAN IP address has to be changed to your unique LAN address. Change the default

IP address, 192.168.0.1, to your unique LAN address.

11. If your ISP dynamically assigns the WAN port IP addresses, do nothing and proceed to the next

step.

If a static WAN IP address needs to be assigned, highlight WAN in Port Selection, then click on

the ISP assigns Dynamic Address check box to disable the feature, then click on the IP

Address field and enter your IP WAN address. Also, ensure that the Net Mask for your WAN is

correct.

12. Click on the OK button.

13. Click on the Default Configuration supplied by your local ISDN service provider. Refer to your

entry in Network Switch Type in Before You Start Loading Your Software in this chapter.

14. Click on the ISDN Dial Number field and enter the telephone number supplied by your ISDN

service provider. The telephone number can be a standard local number or it can include a long

distance prefix.

Note: Some ISDN service providers require only that you enter the phone number you call for

ISDN service.

15. If the phone number is all your ISDN service provider requires, click on the OK button then go to

step 25 to continue loading your software. However, if your ISDN service providers requires that

you enter additional parameters, continue to step 16.

16. Click on the Data TEI field in Network Parameters. Refer to your Data TEI entry in the Network

Configuration section in Before You Start Loading Your Software. If the Data TEI is different, click

on the drop-down list arrow and click on the selection that corresponds to the Data TEI supplied

by ISDN service (i.e., Disabled, Auto TEI, or zero to 63).

17. Click on the Voice TEI field in Network Parameters. Refer to your Voice TEI entry in the

Network Configuration section in Before You Start Loading Your Software. If the Voice TEI is

different, click on the drop-down list arrow, then click on the selection that matches the Voice TEI

supplied by your ISDN service (i.e., Disabled, Auto TEI, or zero to 63).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 103 104

Brak uwag

Multitech MTPSR1-202ST Podręcznik Użytkownika Strona 20