Multitech MTCMR-H Podręcznik Użytkownika Pobierz pdf (Strona 61)

Chapter 3 – Supported GSM/WCDMA AT Commands

High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 61

X Set Connect Result Code Format and Call Monitoring

Description: ATX determines whether or not the TA transmits particular result codes to the TE. It also

controls whether or not the TA verifies the presence of a dial tone when it begins dialing,

and whether or not engaged tone (busy signal) detection is enabled.

Syntax:

Exec. Command: ATX[<value>]

Exec. Response: OK

ERROR

Parameter Description:

<value>

0 CONNECT result code only returned. Dial tone and busy detection are both disabled.

Default.

1 CONNECT <text> result code only returned. Dial tone and busy detection are both

disabled.

2 CONNECT <text> result code returned. Dial tone detection is enabled; busy detection is

disabled.

3 CONNECT <text> result code returned. Dial tone detection is disabled; busy detection is

enabled.

4 CONNECT <text> result code returned. Dial tone and busy detection are both enabled.

Default.

Z Set All Current Parameters to User-Defined Profile

Description: ATZ sets all current parameters to the default configuration. It does not change DCE

baud rate or PDP context profiles.

Syntax:

Exec. Command: ATZ[<value>]

Exec. Response: OK

Parameter Description:

<value>

0 Reset to user profile

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 146 147

Brak uwag

Multitech MTCMR-H Podręcznik Użytkownika Strona 61