Multitech MTCMR-H Podręcznik Użytkownika Pobierz pdf (Strona 113)

Chapter 3 – Supported GSM/WCDMA AT Commands

High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 113

+COLP Connected Line Identification Presentation

Description: This command enables the Connected Line identification Presentation supplementary

service. This can be useful for call forwarding of the connected line. When presentation of

the connected line identification is enabled (and the calling subscriber allows the function),

+COLP unsolicited response is returned in response of an ATD command.

Syntax:

Command Response

Action Command:

AT+COLP=<n>

Read Command:

AT+COLP?

+COLP: <n>,<m>

Test Command:

AT+COLP=?

+COLP: (list of supported <n>s)

Unsolicited Response: +COLP: <number>,<type>[ ,<subaddr>,<satype>[,[<alpha>] ]

Values: <n> Parameter Sets/Shows the Result Code Presentation Status in the Terminal

Adapter

0 Disable

1 Enable

<m> Parameter Shows the Subscriber COLP Service Status in the Network

0 COLP not provisioned

1 COLP provisioned

2 Unknown (no network)

<number> Phone Number

String type

<type> TON/NPI Type of Address Octet for <number> (Integer type)

129 ISDN / telephony numbering plan, national / international

unknown. <number> does not include the international access

code character "+".

145 ISDN / telephony numbering plan, international number

<number> includes the international access code character "+".

161 ISDN / telephony numbering plan, national number

128-255 Other values (refer GSM 04.08 section 10.5.4.7)

<subaddr> Subaddress

String type

<satype> TON/NPI Type of Address Octet for <subaddr> (Integer type)

129 ISDN / telephony numbering plan, national / international

unknown. <subaddr> does not include the international access

code character "+".

145 ISDN / telephony numbering plan, international number

<subaddr> includes the international access code character "+".

161 ISDN / telephony numbering plan, national number

128-255 Other values (refer GSM 04.08 section 10.5.4.7).

<alpha> Phonebook Name Associated with <number>

String type

Parameter Values: The <n> parameter is stored in EEPROM using the AT&W command. The

default value can be restored using AT&F.

See next page for Examples

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 146 147

Komentarze do niniejszej Instrukcji

Brak uwag

Multitech MTCMR-H Podręcznik Użytkownika Strona 113

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Multitech MTCMR-H