Multitech MTCMR-E1 Instrukcja Użytkownika Pobierz pdf (Strona 22)

Chapter 2 – SMTP AT Commands

22 Universal IP AT Commands Reference Guide

#BODYi – Set Pre-Defined Email Combinations

Description: These parameters store pre-defined message bodies. They allow the host application to send

pre-defined email combinations.

Syntax: AT#BODY<value> Interactive mode enter the body followed by CTRL-Z

AT#BODY<value>="<string>" Set the Body<value> string to "<string>"

AT#BODY<value>? Read or display the current setting of BODY<value>

Values: 1 – 3 Predefined email message body

The body content has to be entered after the AT#BODY1<CR> command. It has to be an

alphanumeric ASCII text string up to 120 characters followed this character: 1A (in ASCII code)

and generated on a keyboard by CTRL+Z.

Default: No default.

Example: AT#BODY1<CR>

Text string

<CTRL+Z>

#SMTPNETWORKTIMER – SMTP Client Network Transmit Safety Timeout Value

Description: This parameter determines the inactivity time in seconds of the TCP TX buffer.

This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)

Syntax: AT#SMTPNETWORKTIMER=<parameter1>

Values: 0-65535 – the time in seconds the client will wait for the TCP available TX buffer to be greater

than 0. A setting of 0 will disable the function.

Responses: \r\n#SMTPNETWORKTIMER: VALUE1\r\n

\r\nOK\r\n

\r\nERROR\r\n

Examples:

send: AT#SMTPNETWORKTIMER=100\r

reply: \r\nOK\r\n

send: AT#SMTPNETWORKTIMER?\r

reply: \r\n#SMTPNETWORKTIMER: 100\r\n

reply: \r\nOK\r\n

#SMTPPORT – Set SMTP Server Port

Description: To reach the SMTP server, the TCP/IP stack software must know the port of the SMTP server

used for sending email.

This parameter should be changed only by your network administrator since it depends on

network infrastructure configuration including firewalls, proxy or specific TCP port translation

settings.

Syntax: AT#SMTPPORT=<value>

AT#SMTPPORT? Read or display the current setting (or AT#VSMTP, AT#VALL).

Values: From 1 to 5 digits (each digit between 0 and 9 inclusive). Note that numbers above 65,535 are

illegal as the port identification fields are 16 bits long in the TCP header.

Default: 25

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 118 119

Brak uwag

Multitech MTCMR-E1 Instrukcja Użytkownika Strona 22