Multitech SF100-G-EU Dokumentacja Pobierz pdf (Strona 47)

Chapter 4 – Using the MultiModem iSMS Web Interface

47 MultiModem® iSMS System Administrator’s Guide

SMS Services > SMS Settings

Use this window to set general system settings related to SMS encoding format, time & date format and network

registration.

Extended

ASCII 8-bit

(ISO-8859-1)

Enabling this mode allows the MultiModem iSMS to pass characters in the text message that are made

up of 8 bits instead of 7 bits (1 byte characters 0x80 through 0xFF). When enabled, the Extended ASCII

characters option becomes available on the following windows:

• Send SMS window

• Triggers window

• Preconfigured SMS window.

Set as Factory

Default

To set Extended ASCII 8-bit as the factory default, select this check box and click Save.

Use this option when you want to "Reset to Factory Defaults".

This option is ignored and overwritten when invoking the "Reset MultiModem iSMS Defaults" option.

Save Click Save to set each changed setting before navigating away from this page.

Unicode Enabling this mode allows the MultiModem iSMS to pass characters encoded using UTF16 (2 byte

characters 0x0001 through 0xFFFF). Select this check box and click Save to allow Unicode text in the SMS

messages

Set as Factory

Default

Select this check box and click Save to set Unicode as the factory default. This option is used when

performing a "Reset to Factory Defaults". This option is ignored and overwritten when invoking the

"Reset MultiModem iSMS Defaults" option.

Save Click Save to set each changed setting before navigating away from this page.

Date Select a format for the date:

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 125 126

Brak uwag

Multitech SF100-G-EU Dokumentacja Strona 47