Multitech SF100-G-EU Dokumentacja Pobierz pdf (Strona 11)

Chapter 1 – Product Overview and Safety Information

11 MultiModem® iSMS Administrator’s Guide

Modem Numbering

In the Web interface, the modem tabs correspond to internal modems and use the numbering scheme shown in the

illustration that follows. The row of LEDs shows where the front of the unit is. Disable unpopulated modems as described

in Network Setup.

Back Panels

SF 100

SF 400/800

Back Panel Connectors

Connector Description

GSM Antenna

Connector (s):

1 for the SF 100;

1 – 4 for the SF 400;

1 – 8 for the SF 800

SMA (female) antenna connector for a cellular antenna.

Note: One antenna must be attached for each internal modem in order for them to be

operational.

Ethernet

(LAN for the SF 100)

The LAN (SF 100) / Ethernet (SF 400/800) port connects the MultiModem iSMS to your

Ethernet network-connected PC.

+9V to 32VDC [SF 100 only] The SF 100 power source can range from 9 volts to 32VDC.

Power Receptacle [SF 400/800 only] Connection for standard power cord (provided).

COMMAND [SF 400/800 only] A DE9 port for direct command access to the SF 400/800.

Reset . The Reset button resets the unit to factory settings, which includes deleting any existing

Address Book entries, SMS User account entries and any sent or received SMS history.

This Reset is the same as performing the "MultiModem iSMS Factory Defaults" option

found in the Administration menu. Press and hold the Reset button until the Status LED

turns off, and then release it. Do not press this button unless you want to restore all

settings

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 125 126

Brak uwag

Multitech SF100-G-EU Dokumentacja Strona 11