Multitech RF560VPN Instrukcja Użytkownika Pobierz pdf (Strona 2)

Multi-Tech Systems, Inc.

RF550VPN/RF560VPN Reference Guide – IPSec Tunneling 2

How To: Configuring IPSec Tunneling in Windows

XP or 2000 and Connecting to an

RF550VPN/RF560VPN

This publication may not be reproduced, in whole or in part, without prior expressed written

representations or warranty with respect to the contents hereof and specifically disclaims any

implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-

Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to

time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or

organization of such revisions or changes.

Manual Number S000261D

Revision Date Description

A 05/30/02 Initial release

A1 05/31/02 Added Win2K/XP screen differences

B 08/12/02 Added RF550VPN settings and static IP note.

C 04/16/03 Updated for RF550VPN software version 4.64.

D 07/07/03 Add RF560VPN.

The following configuration procedure shows how to configure IPSec tunneling on a Windows XP

Professional client so that this client can access a LAN through the Internet. The LAN is located

on the protected side of a RF550VPN/RF560VPN. It is assumed that the RF550VPN/RF560VPN

is already configured. This configuration procedure will also work on Windows 2000 with service

pack 2 installed. Comments are included for screens that differ between Win XP and 2K.

Note: The remote client must use a static IP address for IPSec tunneling. This configuration will

not work using a dynamic IP address at the remote client.

1 2 3 4 5 6 7 ... 37 38

Brak uwag

Multitech RF560VPN Instrukcja Użytkownika Strona 2