Multitech RouteFinder MTASR3 Instrukcja Użytkownika Pobierz pdf (Strona 14)

Chapter 1 – Non-NAT Setup Examples

Multi-Tech Systems, Inc. RF820/830 IPSec VPN Setup Examples – A Reference Guide 14

The Following Directions Apply to the RF830 (Side B)

Step 1 for Side B – Network Setup

1. Log in to your RF830 or RF820 and go to Networks & Services screen.

2. Enter a Name for the remote WAN IP address. Example: remote-WAN

3. Enter the remote WAN IP Address (Ex. 65.126.90.248) with a single Subnet Mask of

255.255.255.255.

4. Click Add to add the network to the list.

5. Enter a Name for the remote LAN IP address. Example: Remote-LAN

6. Enter the remote LAN IP Address (Ex. 192.168.25.0) with a network Subnet Mask of

255.255.255.0.

Note: Pictured below is an RF820 screen with the one WAN port. The RF830 screen is the same

except for the addition of the WAN2 and WAN2Interface Names.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 32 33

Brak uwag

Multitech RouteFinder MTASR3 Instrukcja Użytkownika Strona 14