Multitech MTCBA-H3-EN3-P1 Podręcznik Użytkownika Pobierz pdf (Strona 15)

Chapter 2 – Installation

Multi-Tech Systems, Inc. MultiModem rCell User Guide 15

5. After clicking the Wizard Setup selection, the Wizard Setup screen displays.

A minimum router configuration is provided using the Wizard Setup. This provides a quick way to enter and save information

needed to create a connection to the Internet. The table below provides the information for the minimum configuration.

IP Configuration

IP Address

The default is 192.168.2.1. To change it, simply enter your own IP address.

Mask

The default is 255.255.255.0

DNS

Enter the primary DNS IP address for the system. The default is 0.0.0.0

PPP Configuration

PPP

The default is disable. To connect to the Internet, you need to enable PPP.

Depending on the model, commands may need to be issued to the integrated cellular

modem before connecting to the wireless service. To issue commands to the integrated

cellular modem, PPP must be disabled and telnet port 5000 used.

Dial-on-

Demand

The default is disable.

Idle Time Out

Sets the amount of time the PPP link stays active before disconnecting. Setting the value

to zero causes the link to stay active continuously.

Dial Number

Enter the dial number. This number connects you to the Internet.

For HSPA, the number is *99***1#.

For EV-DO models, the Dial Number is #777.

APN

For HSPA models, enter the APN (Access Point Name). The APN is assigned by your

wireless service provider.

For EV-DO models, the APN does not apply

Init String

You can set up to 4 router initialization strings.

PPP Authentication

Authentication

Type

Click the button corresponding to the authentication protocol you want to use to

negotiate with the remote peer. PAP, CHAP, or PAP-CHAP.

Default = PAP-CHAP

Username

Enter the PPP Username. This name authenticates the remote peer.

Password

Enter the PPP Password. This password authenticates the remote peer.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 60 61

Komentarze do niniejszej Instrukcji

Brak uwag

Multitech MTCBA-H3-EN3-P1 Podręcznik Użytkownika Strona 15

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Multitech MTCBA-H3-EN3-P1