Multitech MultiVOIP GSM SIP-to-Cellular Gateways MVPGSM-2 Podręcznik Użytkownika Pobierz pdf (Strona 22)

Chapter 3: MultiVOIP Software

Multi-Tech Systems, Inc. MVPGSM 22

Actions:

• Select Channel

o Select the channel you want to edit

• Disable Interface

o Check box: Enable or Disable Interface

• Use Module for DTMF and Tone Generation

o Check box: Enable or Disable DTMF and Tone generation (this is used in conjunction with out of

band DTMF)

• Enable Caller ID

o Check box: Enable or Disable Caller ID (this determines if Caller ID information coming in from

the wireless network is to be sent over the IP network)

• No Response Timer

o Internal timer for command response time. Range 15-25 seconds; default is 20

• Minimum Signal Quality Required

o Range 0-31

• SIM Pincode

o SIM PIN

 Enter SIM PIN number (this is only necessary in cases where the PIN is required on

power-up)

o SIM PUK

 Enter SIM PIN Unlock Key number (this would only be needed in conjunction with the

above PIN number where 3 incorrect attempts lock an account)

• Modem Setup

o Modem InitString 1-5

 Enter initialization strings (if necessary, internal modem commands can be added)

• Copy Channel (button)

o Copy settings to another channel

• Default (button)

o Reset unit to Factory Default Settings

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 126 127

Brak uwag

Multitech MultiVOIP GSM SIP-to-Cellular Gateways MVPGSM-2 Podręcznik Użytkownika Strona 22