Multitech ISI4608 Podręcznik Użytkownika Pobierz pdf (Strona 13)

Chapter 2—Hardware Installation

4. To avoid damaging the ISI4608-PCI card and your PC, make sure

your computer and any peripheral equipment connected to it are

turned off. The ISI4608-PCI can be installed in a PC-AT, 386, 486,

or Pentium equivalent PCI bus computer.

5. Remove the cover of your computer as instructed in your

computers documentation.

6. Locate the unused PCI slot you will be using for your ISI4608-PCI

card and remove the slot cover according to instructions in your

computers documentation.

7. Install the ISI4608-PCI card into the selected expansion slot in the

same manner as any other add-on card, as instructed in your

computers documentation.

8. Fasten the retaining bracket to computer chassis and replace

cover.

9. Attach the octopus cable to the DB78S female connector on the

ISI4608-PCI card at the back of your computer. The RS232 ports on

the octopus cable are for connecting to modems, multiplexers or

other devices. If the other device is a local terminal port, a

crossover cable (not included) is required between the octopus

cable and the terminal port. See Appendix A for schematic of a

crossover cable.

Note: Any cables connected to the computer must be shielded to

reduce interference.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 69 70

Brak uwag

Multitech ISI4608 Podręcznik Użytkownika Strona 13