Multitech MT5600BA Podręcznik Użytkownika Pobierz pdf (Strona 12)

Chapter 3 – Using the Front Panel

Multi-Tech Systems, Inc. MT5600BA-V92 User Guide 12

Chapter 3 - Using the Front Panel

Like any modem, your Multi-Tech modem operates under the control of a communication program. You

can use general-purpose data communication programs, such as Windows Terminal and HyperTerminal.

For information on how to use the modem with the communication program of your choice, please

refer to the program’s documentation.

Modem Configuration

Your modem normally is configured through Windows or through the communication program you are

using. The default settings work best for most purposes.

You also can configure your modem either through the front panel or by sending AT commands to the

modem. The AT commands can be found in the AT Reference Guide on the CD shipped with this

modem.

Front panel

LED Indicators

The MT5600BA-V92 has six LED indicators on the front panel that indicate status and activity:

LED

Description

Receive Data flashes when the modem is receiving data.

Transmit Data flashes when the modem is transmitting data.

Carrier Detect lights when the modem detects a valid carrier signal from another modem. It is

on when the modem is communicating with the other modem, and off when the link is broken.

Off-Hook lights when the modem is off-hook, which occurs when the modem is dialing, online,

or answering a call. The LED flashes when the modem pulse-dials.

Terminal Ready lights when a communication program is using the modem. It means the

modem is ready for an outgoing or incoming call. It goes off when the communication program

disconnects the serial port. When it goes off, a connected modem will disconnect.

Test Mode lights when the modem is in test mode.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 56 57

Brak uwag

Multitech MT5600BA Podręcznik Użytkownika Strona 12